Description

Uses 29 evenly spaced blue and purple LED chips, helping to avoid uneven spots and/or dark areas.
More concentrated light output thanks to a beam angle of only 15.8°. The new Pulse mode generates 20% less heat.
Ensures a polymerization depth of more than 3 mm in just 5 seconds. Polymerizes all resins on the market.
Performs light curing in 1 second.
Greater wavelength.
Includes a light intensity meter located in the charging base.
Curing lens for focused emission in the polymerization of veneers and the cementation of fiber posts.
Fully metallic body.
It has 7 different working modes: normal, high intensity, turbo, ortho, soft, pulse, and verification.
More uniform and focused light, which provides greater penetrability. Less light loss.
OLED display with two buttons allows for easy operation.
Small, rotating head allows you to reach all angles of the mouth and the back teeth without difficulty.
Working modes of the O-Star PRO Curing Lamp:
Turbo: Cures 2 mm of resin in 1 sec. (2,700-3,000 mW/cm2)
High: Fast and deep curing in 3 or 5 seconds. (1,800-2,000 mW/cm2) Ortho: For gluing braces with 3 x 5 sec. or 3 x 10 sec. with a single press (2,700-3,000 mW/cm2)
Normal: For general restorations 5, 10, 15 or 20 sec. (1,000-1,200 mW/cm2)
Soft Ramp:: Reduces resin shrinkage and the risk of microleaks. 5, 10, 15, or 20-second cycles. (1,000-1,200 mW/cm2)
Pulse Ramp: Generates 20% less heat during long treatments. 5, 10, 15, or 20-second cycles. (1,000-1,200 mW/cm2)
Check: Includes a violet light for precise detection of caries, tartar, and fissures. 30- or 60-second cycles. (200-400 mW/cm2)
Technical Specifications of the O-Star PRO Curing Lamp: Wireless. Weight: 108 gr.
Dimensions: 23 x 204 mm.
Wavelength: 385 – 515 nm.
Light angle: 15.8 degrees.
Light intensity: up to 3000mw/cm².
Large capacity battery (2,000 mAh)